rp / 61 rack & panel 62 barnes industrial road north, wallingford, connecticut 06492 phone:(203)741-5400 fax:(203)741-5500 www.winchesterelectroni cs.com winchester/retconn 42 series panel mount miniature 22 awg - .030" diameter - 5 amps termination types dip solder: .125" or .156" standard lengths with other lengths available on special order. grid spacing: .100" x .100" grid 50 or 74 contact positions on .100" centers in 3 rows. two outboard rows for 25 contacts each. center row either for 24 additional contacts or polarizing pins in specified positions. solder cup: accommodates up to #22 awg stranded wire. crimp removable: crimp contacts available for #20 through #30 awg stranded wire. designed for four indent crimp. see crimp tooling. polarization available in 50 contact configuration only. choice of any combination of 24, center positions. specify polarizing positions required. positions top to bottom are: a, b, c, d, e, f, h, j, k, l, m, n, p, r, s, t, u, v, w, x, y, z, a.b. when 74 contacts are required no polarization other than hardware polarization is available. current rating: 5.0 amps. pin contacts: .030" dia. gold plated brass conforming to specification qq-b-626. socket contacts: gold plated phosphor bronze. termination types: solder cup, dip solder and crimp removable contacts. housing material: red diallyl phthalate for dip solder and solder cup housings. green diallyl phthalate for crimp remov- able housings specifications dielectric: minimum withstanding voltage is one minute electrification at 1200 vac. polarization: polarizing pins may be used in any combination in center row. jackscrews: passivated stainless steel, anodized aluminum knobs. hoods: anodized aluminum, top opening only. crimp tooling automatic crimping machine: cat. no. 107-0952. hand crimping tool: cat. no. 107-0616. locator: cat. no. 107-0617. contact removal tool: cat. no. 107-1012. contact insertion tool: cat. no. 107-1011.
rp / 62 rack & panel 62 barnes industrial road north, wallingford, connecticut 06492 phone:(203)741-5400 fax:(203)741-5500 www.winchesterelectroni cs.com winchester/retconn 42 series panel mount miniature 22 awg - .030" diameter - 5 amps outline dimensions are for reference only and are subject to change. outline drawings on request. ordering information step 5 polarization positions: blank = non-polarized polarization available in 50 contact configuration only. choice of any combination of 24 center positions. specify polarizing positions required. positions top to bottom are: a, b, c, d, e, f, h, j, k, l, m, n, p, r, s, t, u, v, w, x, y, z, a, b. when 74 contacts are required no polarization other than hardware polarization is available. step 3 no. of contacts: 50 or 74 step 4 contact type: s = socket p = pin step 1 series code: series 42 step 2 hardware and accessories: (see bottom chart) solder cup plug (clipped-in contacts) 34 = molding, no hardware 35 = molding, with guides 36 = molding, with fixed jackscrews 52 = molding, with short-turning jackscrews 53 = molding, with long-turning jackscrews 54 = molding, with guides and hood 55 = molding, with long-turning jackscrews 55 = and hood solder cup receptacle (clipped-in contacts) 40 = molding, no hardware 41 = molding, with guides 42 = molding, with short-turning jackscrews, 42 = no hood 43 = molding, with long-turning jackscrews, 42 = no hood 44 = molding, with guides and hoods 45 = molding, with long-turning jackscrews 42 = and hood 46 = molding, with fixed jackscrews 50/74 p/s 42 36 solder cup, clipped-in contacts .100 typ. .06 r .38 2.802 3.125 solder cup .035 dia. typ. .100 (typ.) .31 .23 .69 6-32 unc 2-a thd. typ. 1.563 .38 x 1.41 cable opening .030 dia. typ. 1.469 .23 .69 .17 4-40 unc 2-a thd. typ
rp / 63 rack & panel 62 barnes industrial road north, wallingford, connecticut 06492 phone:(203)741-5400 fax:(203)741-5500 www.winchesterelectroni cs.com winchester/retconn .375 2.802 4-40 unc 2-a thd. typ .156 .100 typ. 3.125 .234 .688 typ. .030 .313 .205 .550 .450 .350 dip solder, molded-in contacts 42 series panel mount miniature 22 awg - .030" diameter - 5 amps outline dimensions are for reference only and are subject to change. outline drawings on request. dip solder receptacle shown: 74 contact right angle configuration. center row eliminated for 50 contact connector. step 5 polarization positions: blank = non-polarized polarization available in 50 contact configuration only. choice of any combination of 24 center positions. specify polarizing positions required. positions top to bottom are: a, b, c, d, e, f, h, j, k, l, m, n, p, r, s, t, u, v, w, x, y, z, a, b. when 74 contacts are required no polarization other than hardware polarization is available. step 3 no. of contacts: 50 or 74 step 4 contact type: p = pin step 1 series code: series 42 step 2 hardware and accessories: dip solder (molded-in contacts) 30 = no hardware 31 = guide pin and socket 32 = fixed jackscrew and jacksocket ordering information step 6 termination type: 4 = dip solder contacts...125" 5 = dip solder contacts...156" 852 = right angle dip solder contacts .205" 74 p 42 4 -30
rp / 64 rack & panel 62 barnes industrial road north, wallingford, connecticut 06492 phone:(203)741-5400 fax:(203)741-5500 www.winchesterelectroni cs.com winchester/retconn 42 series panel mount miniature 22 awg - .030" diameter - 5 amps outline .37 .18 .200 .050 2.800 3.13 .100 typ. .100 .200 .15 2.50 .69 .32 #6-32 unc-2a #6-32 unc-2b 1.54 step 1 series code: series 42 ordering information step 2 1 = crimp connector molding step 3 hardware and accessories: (see bottom chart) step 4 no. of contacts: 50 or 74 step 6 polarization positions: blank = non-polarized polarization available in 50 contact configuration only. choice of any combination of 24 center positions. specify polarizing positions required. positions top to bottom are: a, b, c, d, e, f, h, j, k, l, m, n, p, r, s, t, u, v, w, x, y, z, a, b. when 74 contacts are required no polarization other than hardware polarization is available. step 5 contact type: s = socket p = pin crimp removable contacts are ordered separately. pin contacts: 100-4020p 100-4024p 100-4028p socket contacts: 100-4020s 100-4024s 100-4028s socket contacts (closed entry): 100-54020s 100-54024s 100-54028s see 100 series contact section of rack & panel crimp removable pin contacts 34 = molding, no hardware 35 = molding, with guides 36 = molding, with fixed jackscrews 52 = molding, with short-turning jackscrews 53 = molding, with long-turning jackscrews 54 = molding, with guides and hood 55 = molding, with long-turning jackscrews 55 = and hood crimp removable socket contacts 40 = molding, no hardware 41 = molding, with guides 42 = molding, with short-turning jackscrews, 42 = no hood 43 = molding, with long-turning jackscrews, 42 = no hood 44 = molding, with guides and hoods 45 = molding, with long-turning jackscrews 42 = and hood 46 = molding, with fixed jackscrews 42 p 50 1 36
|
